Introduction
This guide will show how to remove and replace the disk reader in the case that it is no longer reading the DVDs.
What you need
-
-
Use the Phillips Head #2 screwdriver to remove the three 10 mm screws on the back panel.
Ask FixBot
-
-
-
-
Remove the two 7.5 mm screws on both sides of the disk tray with Phillips Head #2 screwdriver.
-
-
-
Push two small prongs on both sides inwards and push forward.
-
Remove the disk tray.
-
-
-
Use the Phillips Head #00 screwdriver to remove the four 6.2 mm corner screws.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
USF Tampa, Team 1-2, Leahy Fall 2016 Member of USF Tampa, Team 1-2, Leahy Fall 2016
USFT-LEAHY-F16S1G2
3 Members
5 Guides authored
