Samsung BD-F5900 WiFi Module Replacement
Louis McKean and 2 other contributors
Last updated on Dec 28, 2017
Views: 690
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 13
- Past 30 Days:
- 99
- All Time:
- 690
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓If there are any issues connecting to the WiFi with the device that can not seem to fixed, this simple guide explains how to replace the module. The only tool required is a #1 Phillips head screwdriver.
What you need
Tools
-
-
-
Using a #1 Phillips head screwdriver, remove the three 10mm screws on the back panel.
-
Tilt the back of the top cover forward to remove from chassis.
Ask FixBot
-
-
-
Gently pull up on the ribbon cable by the blue tab to remove it from the power supply board.
-
-
-
-
-
Disconnect the WiFi board cable connector from the main logic board
-
-
-
-
Using a #1 Phillips head screwdriver, remove the 7.5 mm screw.
-
Slightly tilt the WiFi module sideways to remove from chassis.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team S1-G21, Cagle Fall 2017 Member of USF Tampa, Team S1-G21, Cagle Fall 2017
USFT-CAGLE-F17S1G21
3 Members
60 Guides authored
