Samsung 27E510C Back Panel Replacement
giggythore and 3 other contributors
Last updated on May 21, 2024
Views: 2.4K
View statistics:
- Past 24 Hours:
- 6
- Past 7 Days:
- 20
- Past 30 Days:
- 127
- All Time:
- 2,438
Comments: 1
1 comment on steps.
Completed: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓The back panel is the "lid" that covers many of the monitors electrical components. Therefore this is a prerequisite for most of the other repair guides on this device.
What you need
Tools
-
-
-
Use the #1 Phillips head screw driver to remove each 13.75mm length screw from the rear panel.
Ask FixBot
-
-
Tool used on this step:Heavy-Duty Spudger$4.99
-
Insert the heavy duty spudger in between the monitors back panel and its frame.
-
Use the heavy duty spudger to pry open the back panel.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
