SPOT X SPOTXB USB Port Replacement
Lynda Shemeza and 4 other contributors
Last updated on Jan 6, 2025
Views: 451
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 12
- Past 30 Days:
- 57
- All Time:
- 451
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Needs More Images
A few more images would make this guide's procedures crystal clear.
Missing Steps
Oops! This guide is currently missing one or more important steps.
Better Introduction
Improve this guide by completing or revising its introduction.
Introduction
Go to step 1 ↓If SPOT X SPOTXB's USB-port is broken, this will affect the device's charging ability and any data transfer activities. So, it is important that the USB-port for this device is able to work anytime, any day. To replace the broken USB Port, it might require de-assembling the device.
What you need
Tools
-
-
-
Turn off the device completely by holding the power button for 10-20 seconds to force a shutdown.
Ask FixBot
-
-
-
Remove the seven 4.1 mm screws from the back of the device using a T4 Torx screwdriver.
-
-
-
-
-
Remove the ten 2.9 mm screws from the motherboard using a T5 Torx screwdriver.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
University of North Texas, Team 4-2, Harold Fall 2024 Member of University of North Texas, Team 4-2, Harold Fall 2024
UNT-HAROLD-F24S4G2
4 Members
48 Guides authored
