SAFFUN Wireless N64 Controller Back Plate Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

Use this guide to remove the backplate from the SAFFUN Wireless N64 Controller.

What you need

Step 1 Back Plate

SAFFUN Wireless N64 Controller Back Plate Replacement, Back Plate: step 1, image 1 of 1

Before you begin, make sure the controller is disconnected and the LED indicator light is off.

Ask FixBot

Step 2

SAFFUN Wireless N64 Controller Back Plate Replacement: step 2, image 1 of 2

SAFFUN Wireless N64 Controller Back Plate Replacement: step 2, image 2 of 2

Use a Phillips #1 screwdriver to remove the seven 9.3 mm screws from the backplate.

Ask FixBot

Step 3

SAFFUN Wireless N64 Controller Back Plate Replacement: step 3, image 1 of 2

SAFFUN Wireless N64 Controller Back Plate Replacement: step 3, image 2 of 2

Use a Phillips #1 screwdriver to remove the two 9.3 mm screws.
Use a screwdriver with a shaft length of at least 60 mm to reach the deep-set screws.

Ask FixBot

Step 4

SAFFUN Wireless N64 Controller Back Plate Replacement: step 4, image 1 of 3

SAFFUN Wireless N64 Controller Back Plate Replacement: step 4, image 2 of 3

SAFFUN Wireless N64 Controller Back Plate Replacement: step 4, image 3 of 3

Slide an opening pick along the edge of the rear cover to release the clips.
Gently remove the back plate from the controller.

Ask FixBot

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 4 other contributors

Blake

Member since: 09/23/25

109 Reputation

1 Guide authored

Team

Austin Community College, Team 1-3, Tijerina Fall 2025 Member of Austin Community College, Team 1-3, Tijerina Fall 2025

AUSTINCC-TIJERINA-F25S1G3

4 Members

5 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 23

All Time: 199