Ryobi CSB125 Blade Replacement
Curtis Melo and one other contributor
Last updated on Jan 6, 2020
Views: 2.4K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 20
- Past 30 Days:
- 77
- All Time:
- 2,351
Comments: 1
1 guide comment.
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This guide will show you how to properly install a new blade to your Ryobi CSB125 circular saw. When performing cuts, if there is a burning smell then most likely the blade is either dirty or dull. In this case, the blade should be replaced with a new one. This troubleshooting page will help diagnose any potential problems occurring due to a faulty blade. In the event that a new blade is needed, this guide will show the steps to properly install a new one. The only tool you will need is a 7”/32 allen key.
What you need
Tools
-
-
-
Remove the 5/16-18 x 9/16 in. blade screw, spring washer, and the outer blade washer.
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
UMass Dartmouth, Team S2-G1, Barthe Fall 2019 Member of UMass Dartmouth, Team S2-G1, Barthe Fall 2019
UMASSD-BARTHE-F19S2G1
3 Members
60 Guides authored
1 Guide Comment
I think this is the wrong title.these instructions show how to remove the blade NOT replace it.
