Skip to main content

Free Shipping on Domestic Orders $75+

Rowenta Focus Power Assembly Replacement

Views: 8.9K

View statistics:

Past 24 Hours:
3
Past 7 Days:
51
Past 30 Days:
173
All Time:
8,921
Comments: 5

3 comments on steps, 2 guide comments.

Go to guide comments
Completed: 4

4 people have marked this guide "completed." Will you be next?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: 10 - 20 minutes
Difficulty: Easy
Rowenta Focus Power Assembly Replacement

Introduction

Go to step 1 ↓

This guide will provide a step-by-step walkthrough on how to replace the power assembly of a Rowenta Focus DW5080. This is useful for troubleshooting a faulty power cord and allowing the iron to have power again. This part should only be replaced if the outlet the cord was plugged into has been checked and works. The light on the iron should not be on and the iron should not be getting warm if this part is damaged.

Prior to beginning this repair, be sure the device is turned off and unplugged.

What you need

Tools

    1. Rowenta Focus Power Assembly Replacement, Power Assembly: step 1, image 1 of 2 Rowenta Focus Power Assembly Replacement, Power Assembly: step 1, image 2 of 2
      • Using a T20 screwdriver, remove the 20 mm screw on the back of the iron.

      • Unplug iron before removing cover and make sure the iron is cool before beginning the repair.

      Ask FixBot

      Add Comment

    2. Rowenta Focus Power Assembly Replacement: step 2, image 1 of 3 Rowenta Focus Power Assembly Replacement: step 2, image 2 of 3 Rowenta Focus Power Assembly Replacement: step 2, image 3 of 3
      • Pry the back cover of the iron off using a metal spudger.

      • Remove the back cover, exposing the wiring in the iron.

      Ask FixBot

      Add Comment

    3. Rowenta Focus Power Assembly Replacement: step 3, image 1 of 2 Rowenta Focus Power Assembly Replacement: step 3, image 2 of 2
      • Remove the frontmost (main) power cord to give access to inner wiring and accessories.

      • Leave the other cords attached to the main cord.

      Ask FixBot

      Add Comment

    4. Rowenta Focus Power Assembly Replacement: step 4, image 1 of 2 Rowenta Focus Power Assembly Replacement: step 4, image 2 of 2
      • Pull out the motherboard inside handle of iron.

      • Keep it attached to main power cord and other components.

      Ask FixBot

      Add Comment

    5. Rowenta Focus Power Assembly Replacement: step 5, image 1 of 3 Rowenta Focus Power Assembly Replacement: step 5, image 2 of 3 Rowenta Focus Power Assembly Replacement: step 5, image 3 of 3
      • Remove the 4-pronged adaptor from inside the iron by grabbing the black plastic piece and pulling straight out.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device with new power supply, follow these instructions in reverse order.

Cancel: I did not complete this guide.

4 other people completed this guide.

2 Guide Comments

Thanks... Where we can get parts

Baiju Vasavan - Reply Share

Tengo un Rowenta de la que se recoge el cable pero no veo los tornillos por donde destaparla

Jose Rojas - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 51

Past 30 Days: 173

All Time: 8,921