Fix Your Stuff Community Store

Free Shipping on Domestic Orders $75+

Roconia Q6 Top Cover Replacement

Introduction

This guide will show you how to open your Roconia device to access its internal components.

What you need

  1. Roconia Q6 Top Cover Replacement, Top Cover: step 1, image 1 of 2 Roconia Q6 Top Cover Replacement, Top Cover: step 1, image 2 of 2

    • Flip your device upside down so that the interface is facing downwards.

    Edit

  2. Roconia Q6 Top Cover Replacement: step 2, image 1 of 3 Roconia Q6 Top Cover Replacement: step 2, image 2 of 3 Roconia Q6 Top Cover Replacement: step 2, image 3 of 3

    • The device is supported by rubber pieces located at the bottom extremities.

    • There are screws beneath the rubber pieces that can be removed. Remove all four 1.1 mm Phillips #1 screws by using the Phillips #0 screwdriver.

    Edit

  4. Roconia Q6 Top Cover Replacement: step 3, image 1 of 3 Roconia Q6 Top Cover Replacement: step 3, image 2 of 3 Roconia Q6 Top Cover Replacement: step 3, image 3 of 3

    • Turn device over again and pry open the device to remove the cover.

    Edit

  5. Roconia Q6 Top Cover Replacement: step 4, image 1 of 3 Roconia Q6 Top Cover Replacement: step 4, image 2 of 3 Roconia Q6 Top Cover Replacement: step 4, image 3 of 3

    • Pull out the cable that is connected to the top cover to fully separate.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 7

All Time: 194