Ridgid R175RNE Magazine Replacement
Brandin M and 2 other contributors
Last updated on Jun 26, 2024
Views: 407
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 8
- Past 30 Days:
- 46
- All Time:
- 407
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓If your Ridgid R175RNE pneumatic coil nailer magazine is cracked or is otherwise no longer able to hold nails, then follow this guide to learn how to replace the magazine.
The magazine is what holds the coil of nails prior to them being fired, and is located directly below the firing mechanism.
Caution: Be sure that there are no nails present in the magazine before removing it.
What you need
Tools
-
-
-
-
Remove the single 5/32" hex screw that secures the magazine to the lower portion of the handle.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Team
University of North Texas, Team 3-7, Kilpatrick Spring 2024 Member of University of North Texas, Team 3-7, Kilpatrick Spring 2024
UNT-KILPATRICK-S24S3G7
3 Members
84 Guides authored
