Revlon One-Step Hair Dryer Barrel Replacement
Rory Chappuis and 3 other contributors
Last updated on May 12, 2022
Views: 2.9K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 20
- Past 30 Days:
- 114
- All Time:
- 2,921
Comments: 9
7 comments on steps, 2 guide comments.
Go to guide commentsCompleted: 5 6
5 people have marked this guide "completed." Will you be next?
6 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This replacement guide will help users to properly replace the barrel of the Revlon One-Step Hair Dryer. Replacing this component of the hair dryer could potentially resolve any problems regarding air flow.
What you need
Tools
-
-
-
First, remove the pink panels on each side of the handle in order to access the screws.
Ask FixBot
-
-
-
After removing the pink panels, there will be one visible screw on each side of the dryer handle measuring at 11mm.
-
Carefully unscrew both of these screws with a tri-point Y000 screwdriver.
-
Next, completely remove the screws out of the dryer handle.
-
-
-
-
Remove the barrel by twisting and pulling it away from the handle of the dryer.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Team
University of Alabama, Team 1-4, Bedsole Spring 2022 Member of University of Alabama, Team 1-4, Bedsole Spring 2022
UA-BEDSOLE-S22S1G4
3 Members
60 Guides authored
2 Guide Comments
Donde puedo comprar el cilindro repuesto?
Hola a todos!!! Donde puedo conseguir el cilindro del secador
