Replacing Creative Zen X-Fi Button Input Chip Part 1
Westley Courchene and 2 other contributors
Last updated on Jun 17, 2015
Views: 867
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 17
- Past 30 Days:
- 97
- All Time:
- 867
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Introduction
Go to step 1 ↓This chip allows the user to input information to the device and to navigate the MP3 player's menus.
What you need
Tools
-
Spudger4.9
-
-
-
Using a spudger, wedge the tip between the front and back case to pry them apart.
Ask FixBot
-
-
-
-
-
The black rubber button pad can be removed by simply picking it up.
-
-
-
-
-
Flip the LCD screen off the midsection plate to gain access to the space around the input button chip.
-
-
-
-
Using a spudger, pry off the button input chip from the mid-section of the device. To gain best leverage, start at the bottom right corner and level your way up the side of the chip.
-
-
To reassemble your device, follow these instructions in reverse order.
