What you need
-
-
Remove the eight screws holding the wood-patterned cover to the microwave frame.
-
The first four screws are located on either side of the microwave front.
-
-
-
Remove the additional four screws securing the wood-paneled case to the microwave frame.
-
-
-
-
Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame.
-
Lift the case upward slowly until the case is free of the microwave.
-
-
-
Observe the lever mechanism found just behind the door handle, inside the microwave.
-
-
-
Lift up on the outside lever.
-
Push up on the white plastic piece.
-
Push metal bar down, snapping the white plastic piece above it.
-
-
-
This is how the fixed mechanism should look.
-
Press the button and enjoy your newly fixed door!
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 2-12, Propen Fall 2012 Member of Cal Poly, Team 2-12, Propen Fall 2012
CPSU-PROPEN-F12S2G12
3 Members
12 Guides authored
