Introduction
The purpose of this guide is to demonstrate how to locate and remove the 1150 Wireless MiniPCI Card.
What you need
-
-
-
Turn the laptop upside down and locate the panel labeled C.
-
Unscrew the single screw holding the cover in place.
-
Lift up the cover and remove it to expose the Wireless MiniPCI Card.
Ask FixBot
-
-
-
-
Using a plastic spudger or similar, gently pry the grey and black wires off.
-
Gently pull the retaining clips away from the board so that the board pops up.
-
-
-
Lift the board up and out of the mini PCI slot at an angle of about 35 - 45 degrees
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 16-2, Maness Spring 2010 Member of Cal Poly, Team 16-2, Maness Spring 2010
CPSU-MANESS-S10S16G2
4 Members
96 Guides authored
