Ray Ban Case repair
Team on and one other contributor
Last updated on Mar 5, 2025
Views: 1.5K
View statistics:
- Past 24 Hours:
- 6
- Past 7 Days:
- 35
- Past 30 Days:
- 177
- All Time:
- 1,460
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓I hope this is helpful to someone out there in the wide world.
-
-
-
Remove the original snap button and place a peace of real leather beneath from the inside, sew along the original sewing line and cut off the stand over leather along the shape of the case.
Ask FixBot
-
-
-
-
In case you have take a bigger size of the snap button, also replace the bottom piece!
-
-
Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen.
