Introduction
This guide will show how to replace one of the controller buttons should they become inoperative. Soldering is a skill needed to complete this action. The button being replaced is 6mm x 6mm x 9mm.
What you need
-
-
-
Remove the single 6.5mm Phillips #1 screw from the battery cover.
-
Remove the three AAA batteries.
Ask FixBot
-
-
-
Remove seven 6.5mm Phillips #1 screws from the back panel.
-
Pull the back panel up to separate it from the front panel.
-
-
-
-
Remove three 4.5mm Phillips #1 screws from the motherboard.
-
Pull the motherboard out of the case.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
IUPUI, Team S2-G3, Harley Summer 2018 Member of IUPUI, Team S2-G3, Harley Summer 2018
IUPUI-HARLEY-SU18S2G3
4 Members
24 Guides authored
