Introduction
This guide is for replacing the rechargeable battery in the Protocol Dronium Two. This repair doesn't require tools. A spare battery is not included in the packaging but can be bought from the Protocol store.
What you need
-
-
-
Turn the drone off by moving the selector switch to the left.
Ask FixBot
-
-
-
On the underside of the drone, gently pull the battery compartment away from the drone.
-
-
-
-
If the power cable of the battery is connected to the drone, remove it by gently pulling it out.
-
-
-
Remove the battery from its compartment by sliding it out away from the drone.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Arkansas State University, Team 1-2, Chamberlain Spring 2017 Member of Arkansas State University, Team 1-2, Chamberlain Spring 2017
ARSU-CHAMBERLAIN-S17S1G2
4 Members
60 Guides authored
