Protocol Dronium 3x Controller Battery Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

The Protocol Dronium 3x remote controller is used to control the drone. The controller uses 4 AA batteries that are accessed on the back side of the controller. The Protocol Dronium 3x can also be controlled via the Protocol app on both the Apple App Store and Google Play Store.

What you need

Step 1 Controller Battery

Protocol Dronium 3x Controller Battery Replacement, Controller Battery: step 1, image 1 of 2

Protocol Dronium 3x Controller Battery Replacement, Controller Battery: step 1, image 2 of 2

Ensure the controller is powered off.
Using a Phillips #0 screwdriver, unscrew the screw holding the battery lid on the controller. Keep in mind that the screw will be attached to the lid.
Remove lid and screw.

Ask FixBot

Step 2

Protocol Dronium 3x Controller Battery Replacement: step 2, image 1 of 1

Remove batteries from battery compartment.
Discard the used batteries.
Place new batteries in the controller in the correct orientation.

Ask FixBot

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

One other person completed this guide.

Author

with 3 other contributors

Alexander George

Member since: 09/17/18

395 Reputation

4 Guides authored

Team

Washington State, Team S29-G7, Hope Fall 2018 Member of Washington State, Team S29-G7, Hope Fall 2018

WSU-HOPE-F18S29G7

3 Members

4 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 42

All Time: 453