Introduction
After rough flights the stabilizer beam may end up getting damaged. Without a working stabilizer beam, the gyro-copter will not fly as it should. The best way to fix this is by replacing the stabilizer beam completely.
What you need
-
-
Tool used on this step:Tweezers$4.99
-
Place the tweezers on the sides of the links and pull straight away from the top point of connection.
Ask FixBot
-
-
-
-
-
Tool used on this step:Tweezers$4.99
-
Using the tweezers twist the rotor attachment bracket apart.
-
-
-
Pull up on the stabilizer assembly to remove it completely from the drive shaft.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 17-2, Forte Spring 2015 Member of Cal Poly, Team 17-2, Forte Spring 2015
CPSU-FORTE-S15S17G2
4 Members
84 Guides authored
