ProScan PLT7223G Speakers Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

If your ProScan's audio is not working, use this guide to replace the speakers. This guide will require soldering.

What you need

Step 1 Speakers

ProScan PLT7223G Speakers Replacement, Speakers: step 1, image 1 of 1

Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.

Ask FixBot

Step 2

ProScan PLT7223G Speakers Replacement: step 2, image 1 of 1

Use the blue plastic opening tool to pry open the tablet.
You will hear popping sounds. That's okay.
Be careful when using the blue plastic opening tool on the side of the device near the speakers, as there is a wire here that connects the speakers to the motherboard.

Ask FixBot

Step 3

ProScan PLT7223G Speakers Replacement: step 3, image 1 of 1

Pull back the protective tape from the two wires that connect the speakers to the motherboard.

Ask FixBot

Step 4

ProScan PLT7223G Speakers Replacement: step 4, image 1 of 1

Use the soldering tool to remove speaker wires from motherboard.
Soldering tool will get hot, handle with care.

Ask FixBot

Step 5

ProScan PLT7223G Speakers Replacement: step 5, image 1 of 2

ProScan PLT7223G Speakers Replacement: step 5, image 2 of 2

If needed use a plastic opening tool to remove speaker from the speaker port on the tablet.

Ask FixBot

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 4 other contributors

Laura Kneeshaw

Member since: 01/12/16

441 Reputation

2 Guides authored

Team

Eastern Washington University, Team 1-4, Rowley Winter 2016 Member of Eastern Washington University, Team 1-4, Rowley Winter 2016

EWU-ROWLEY-W16S1G4

4 Members

10 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 18

All Time: 565