ProScan PLT7223G Screen Replacement
Nathaniel Girard and 4 other contributors
Last updated on Apr 14, 2016
Views: 2.3K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 16
- Past 30 Days:
- 87
- All Time:
- 2,266
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 6 7
6 people have marked this guide "completed." Will you be next?
7 people have marked this guide "completed." Including you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Introduction
Go to step 1 ↓If your screen is cracked or not working at all, use this guide to replace it.
What you need
Tools
-
-
-
Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.
Ask FixBot
-
-
-
Insert a spudger under the black tape that connects the silver wire to the interior of the front panel
-
Pull back the black tape with the spudger until it can be lifted up with your fingers.
-
Use your fingers to grab and lift the remainder of the black tape from device panel.
-
-
-
-
Use a plastic opening tool to push back the ZIF connector to release the ribbon wire on the motherboard.
-
-
-
Insert an opening tool underneath the silver base of the internal device element.
-
Use the opening tool to pry the element out of the case that holds the screen.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Team
Eastern Washington University, Team 1-4, Rowley Winter 2016 Member of Eastern Washington University, Team 1-4, Rowley Winter 2016
EWU-ROWLEY-W16S1G4
4 Members
60 Guides authored
