ProScan PLT7050 Speaker Replacement
Jazmine Jackson and 4 other contributors
Last updated on Apr 14, 2017
Views: 597
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 13
- Past 30 Days:
- 95
- All Time:
- 597
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This is the speaker replacement guide. If the Proscan PLT 7050 tablet is producing static or no sound at all, follow these steps to replace the speaker.
What you need
Tools
-
-
-
Make sure device is unplugged and turned off while working on the device.
-
Remove 2 Phillips head, 4.3 mm screws from the bottom side of the tablet with a PH00 screwdriver.
Ask FixBot
-
-
-
Use the plastic opening tools to pry the back of the tablet open.
-
You may need to slide the tool along the sides of the device to get it to open. You might hear some popping noises, it is okay.
-
-
-
-
-
-
Use the soldering tool to remove the two speaker wires from the mother board.
-
To reassemble your device, follow these instructions in reverse order.
Team
Eastern Washington University, Team 1-4, Mathisen Winter 2017 Member of Eastern Washington University, Team 1-4, Mathisen Winter 2017
EWU-MATHISEN-W17S1G4
5 Members
72 Guides authored
