Introduction
This guide provides the necessary information on fully disassembling the Proline HB25 hand blender.
What you need
-
-
-
Pull out the backtab of the housing.
-
Push in the snapfits with, for instance, a screwdriver.
-
-
-
Separate the housing with calibrated force.
-
Use a flathead screwdriver to push out the lower function button.
-
Remove the separating device.
-
-
-
-
Push on the side of the housing of the button to push the button out of the housing.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Delft University of Technology, Team S1-G2, Flipsen Winter 2018 Member of Delft University of Technology, Team S1-G2, Flipsen Winter 2018
TUD-FLIPSEN-W18S1G2
5 Members
12 Guides authored
