Presto Stirring Popper 0520002 Base Replacement
Last updated on Dec 4, 2020
Views: 447
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 10
- Past 30 Days:
- 43
- All Time:
- 447
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide's details are missing. Help users by adding tools, difficulty, or time.
What you need
Tools
-
-
-
Detach the cover/serving bowl from the popper.
-
Flip the base of the popper over and remove the four 14 mm Phillips #2 screws attaching the bottom cover to the base.
Ask FixBot
-
-
-
Removing the bottom cover exposes the internals of the popper. The base holds together the centrally mounted motor and the wires for the power cord and heating element.
-
-
-
-
-
-
Remove the two black wire twist caps, and unwind the different wires.
-
Remove two more 14 mm Phillips #2 screws attaching the white plastic holding the wall cord to the base.
-
-
-
Remove the two 14 mm Phillips #2 screws from the motor.
-
Remove the motor from the popper.
-
-
-
To reassemble your device, follow these instructions in reverse order.
