PowerA Spectra Infinity Enhanced Joysticks Replacement
Kevyn Jorge and 2 other contributors
Last updated on Jun 12, 2024
Views: 2.9K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 19
- Past 30 Days:
- 91
- All Time:
- 2,907
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 6 7
6 people have marked this guide "completed." Will you be next?
7 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Use this guide to replace/remove the joysticks of a Power A Spectra Infinity Enhanced Xbox controller.
The joysticks may need to be replaced if they’re worn down, sticky, cracking, or causing unintentional user input. Please ensure the controller is not plugged in before taking it apart.
What you need
Tools
-
-
-
Remove the eight 10 mm screws from the back of the controller using a Phillips #0 screwdriver.
-
-
-
Unlock the trigger locks before removing the backplate.
-
Use your fingers and carefully remove the backplate.
-
-
-
Remove the two 10 mm screws connecting the motherboard to the faceplate using a Phillips #0 screwdriver.
-
-
-
-
-
Take the motherboard and place it with the joysticks facing upward.
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Team
UMass Dartmouth, Team 6-5, Botvin Spring 2024 Member of UMass Dartmouth, Team 6-5, Botvin Spring 2024
UMASSD-BOTVIN-S24S6G5
3 Members
72 Guides authored
