PowerA Spectra Controller Buttons Replacement
Mallorie Barton and 3 other contributors
Last updated on Jan 6, 2025
Views: 414
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 18
- Past 30 Days:
- 67
- All Time:
- 414
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓After frequent use of the controller, the buttons may get worn out and possibly get stuck depending on how long the controller has been used. Because of this frequent repetitive use, the buttons may need to be replaced.
What you need
Tools
-
-
-
Use a Phillips #2 screwdriver to remove the eight 7.8 mm screws that secure the rear case.
-
-
-
-
Use a Phillips screwdriver to remove the two 7.8 mm screws securing the motherboard to the chassis.
-
-
-
-
Pull the old buttons out of the shell of the controller using the angled tweezers.
-
-
Ask FixBot
To reassemble your device, follow the above steps in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
Team
University of North Texas, Team 2-1, Coppersmith Fall 2024 Member of University of North Texas, Team 2-1, Coppersmith Fall 2024
UNT-COPPERSMITH-F24S2G1
4 Members
48 Guides authored
