What you need
-
-
When changing the sander pad, be sure to rotate the sander upside down so the pad and three highlighted screws are facing upward toward you.
-
Once the sander is upside down begin by removing your old sandpaper.
-
Once the sandpaper is removed locate the three screws on your sander pad.
Ask FixBot
-
-
-
-
Remove the three, (star bolt) screws with the iFixit screw driver with a "T20" head. Be sure to hold the pad of the sander as it will rotate as you try to loosen the screws.
-
Once the screws are removed pull upward toward you and the sander pad will come apart from the device.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
UMass Dartmouth, Team 8-7, Botvin Spring 2016 Member of UMass Dartmouth, Team 8-7, Botvin Spring 2016
UMASSD-BOTVIN-S16S8G7
3 Members
4 Guides authored
