Introduction
This guide will show you the required steps to complete a screen replacement.
What you need
-
-
Locate and remove the two 3.5 mm long screws on the inside tray.
-
Screw head: JIS J00
-
Remove the inside tray.
-
-
-
-
Gently pull the ribbon away from the logic board. This will allow the screen to separate from the rest of the camera.
-
-
-
Locate and remove four 3.5 mm long screws on the inside of the door.
-
Screw head: JIS J00
-
-
-
Once the panel is removed, the malfunctioning screen will slide out and can be replaced.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Team
IUPUI, Team S2-G1, Harley Fall 2018 Member of IUPUI, Team S2-G1, Harley Fall 2018
IUPUI-HARLEY-F18S2G1
3 Members
4 Guides authored
