Skip to main content

Free Shipping on Domestic Orders $75+

Plugging in Shure SM58 XLR Cable

  1. Plugging in Shure SM58 XLR Cable, XLR Cable Plug In: step 1, image 1 of 1
    • Make sure you have a proper three pin XLR cable.

    • Grab the female end of the cable (plug with three holes).

  2. Plugging in Shure SM58 XLR Cable: step 2, image 1 of 1
    • Line up the pins in the end of the microphone (microphone connecter) with the holes in the XLR cable.

  3. Plugging in Shure SM58 XLR Cable: step 3, image 1 of 1
    • Once the pins are aligned, push the cable into the bottom end of the microphone. You should hear a click.

Conclusion

To disconnect the cable from the microphone, follow the instructions in reverse.

13 other people completed this guide.

nat coll

Member since: 09/27/12

850 Reputation

14 Guides authored

Team

Cal Poly, Team 7-53, Forte Fall 2012 Member of Cal Poly, Team 7-53, Forte Fall 2012

CPSU-FORTE-F12S7G53

5 Members

33 Guides authored

21 Guide Comments

When disconnecting the cable - press the little latch (pointing towards you in the last picture) to release and then pull the cable out.

harrywwc - Reply Share

Is this April's fool? XD

s6963172 - Reply Share

how i repair the PG48 the XLR conector moves in and out when the cable ar plugged. The conector male in the microphone have an screw but that one not works...

What am i do?

If you have an idea to the answer or any tip to resolve this trouble feel fre to tweet me.

@ Theradioholic

on

#Twitter

Santiago Morales - Reply Share

I know a few people who would see this and still screw it up.

jimboc - Reply Share

do it in reverse? you have to press the button though on the male end...

Michael Fox - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 36

Past 30 Days: 111

All Time: 70,568