Philips SBA1060 Speaker Replacement
April Driscoll and 4 other contributors
Last updated on Jan 28, 2014
Views: 2.2K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 20
- Past 30 Days:
- 83
- All Time:
- 2,248
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Better Introduction
Improve this guide by completing or revising its introduction.
Introduction
Go to step 1 ↓The speakers are the two circular objects inside the device. This guide will detail the steps in how to replace a damaged speaker.
What you need
-
-
-
Remove the back cover by sliding it off.
-
Remove the 3 AAA batteries.
Ask FixBot
-
-
-
Unscrew the nine exterior screws on the back panel using a PH0-size Philips-head screwdriver.
-
Remove the triangular end piece by pulling it straight off.
-
-
-
Remove the colored grill by sliding it off in the direction of the removed end piece.
-
Pry off the back battery panel with the plastic opening tool.
-
-
-
-
-
Remove the circuit board by unscrewing the two interior screws located on the circuit board.
-
Pull out the battery plugs from the circuit board by pulling out the plugs to fully remove the back panel from the rest of the speaker.
-
-
-
Locate the speaker needing replacing.
-
Remove the one screw holding the speaker in place with a PH0 size philips head screw driver.
-
-
-
-
Score the glue that is holding the speaker in place with the spudger, and use your hands to pry off the speaker.
-
-
-
Using a non-conductive glue, carefully seal the speaker to the casing.
-
Follow the glue instructions as set by the manufacturers. Let the glue set the appropriate amount of time.
-
Reassemble the device
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Clemson, Team 14-4, Benson Fall 2013 Member of Clemson, Team 14-4, Benson Fall 2013
CLEM-BENSON-F13S14G4
3 Members
48 Guides authored
