Philips Respironics V60 Fan Replacement
Rie Kuraoka and 2 other contributors
Last updated on Jul 3, 2020
Views: 1.2K
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 13
- Past 30 Days:
- 77
- All Time:
- 1,194
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓This is a replacement guide for the fan in a Philips Respironics V60 ventilator. The cooling fan within the ventilator prevents the system from heating up too much. So it is important to ensure that this fan is kept clean and functioning.
For more information on replacing the fan, please refer to page 9-6 in the service manual.
What you need
-
-
-
Press and release the ON/Shutdown key, opening the Shutdown window in the screen.
-
Select Ventilator Shutdown, which will shut down the ventilator.
Ask FixBot
-
-
-
-
-
-
Turn the captive D-ring fastener on the bottom of the panel counter-clockwise one-quarter turn and release.
-
Then remove the right side panel.
-
-
-
-
-
Remove fan filter assembly (the fan filter and housing), from outside the back panel.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team S7-G10, Paton Spring 2020 Member of Cal Poly, Team S7-G10, Paton Spring 2020
CPSU-PATON-S20S7G10
2 Members
108 Guides authored
