Skip to main content

Free Shipping on Domestic Orders $75+

Philips Norelco OneBlade Servo Motor Replacement

What you need

  1. Philips Norelco OneBlade Servo Motor Replacement, Servo Motor: step 1, image 1 of 3 Philips Norelco OneBlade Servo Motor Replacement, Servo Motor: step 1, image 2 of 3 Philips Norelco OneBlade Servo Motor Replacement, Servo Motor: step 1, image 3 of 3
    • Ensure razor is off and razor blade has been removed.

    Ask FixBot
  2. Philips Norelco OneBlade Servo Motor Replacement: step 2, image 1 of 2 Philips Norelco OneBlade Servo Motor Replacement: step 2, image 2 of 2
    • Locate crease in bottom third of razor.

    • Hold razor in both hands, and place thumbs near crease.

    • Slightly bend the razor near crease.

    • Pull casing apart.

    • Device may turn on upon removal. Turn off razor before continuing.

    Ask FixBot
  3. Philips Norelco OneBlade Servo Motor Replacement: step 3, image 1 of 3 Philips Norelco OneBlade Servo Motor Replacement: step 3, image 2 of 3 Philips Norelco OneBlade Servo Motor Replacement: step 3, image 3 of 3
    • Locate wires below motor on either side of circuit board.

    • Remove solder from each joint using solder removal kit.

    • Do not attempt to remove wires by force.

    Ask FixBot
  4. Philips Norelco OneBlade Servo Motor Replacement: step 4, image 1 of 1
    • Remove new motor from package and place in position.

    • Motor should sit above circuit board with connection prongs facing downward. Additionally, center extrusion on bottom of motor should sit in provided hole.

    Ask FixBot
Conclusion

To reassemble your device, follow these instructions in reverse order.

Please dispose of servo motor properly. For recycling information, please contact your local waste management facilities or visit www.recycle.philips.com

5 other people completed this guide.

Joshua Etchberger

Member since: 11/07/17

499 Reputation

3 Guides authored

Team

IUPUI, Team S3-G3, Harley Fall 2017 Member of IUPUI, Team S3-G3, Harley Fall 2017

IUPUI-HARLEY-F17S3G3

3 Members

7 Guides authored

12 Guide Comments

does removing the motor exposing the battery? In my unit I see some green thing underneath the motor, looks like a AA battery, can you confirm?

or is it from somewhere else? (I need to replace my battery)

Yarden Cohen - Reply Share

I just dismantled my shaver, and it has a 1.2v AA size NiMH battery (suppo hsy aa1200).

João Paulo Gomes - Reply Share

I’m also curious about the battery. Any one have pictures of it or know what kind of battery it has inside?

James Almeida - Reply Share

I just dismantled my shaver, and it has a 1.2v AA size NiMH battery (suppo hsy aa1200)

João Paulo Gomes - Reply Share

Thanks! This definitely helps.

James Almeida - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 29

Past 30 Days: 142

All Time: 22,465