This translation was generated by a machine and has not been reviewed by a person yet. Speak this language? Review it.
Phase 01 Top Cover and Rear Cover
Lacito and one other contributor
Last updated on Sep 2, 2026
Views: 168
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 13
- Past 30 Days:
- 60
- All Time:
- 168
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
-
-
-
Then, remove the 2 MAQ screws installed on the rear of the machine's top cover, and afterwards remove the 2 MAQ CHAT screws on the top using a 1/8 Phillips screwdriver. (Photo 1)
Ask FixBot
-
-
-
Now we will remove the rear cover; to do this, remove the 5 MAQ Phillips screws secured to the back of the machine.
-
To do this, pull out the white 2-wire connector. (Photos 2 and 3)
-
-
-
