Penny Board Trucks Replacement
Eduardo Ron and one other contributor
Last updated on Jun 9, 2021
Views: 1.2K
View statistics:
- Past 24 Hours:
- 6
- Past 7 Days:
- 21
- Past 30 Days:
- 84
- All Time:
- 1,172
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓The trucks on a Penny board are an essential part of the board. They can get damaged in a variety of ways, which can lead to an unpleasant riding experience. Whether they get worn down or completely broken, they will need a replacement. Luckily, this repair is pretty simple so one can get back to skating in no time. For this repair, a skate tool will be required.
What you need
Tools
-
-
-
Use a skate tool to loosen the bolt in the wheel with an appropriately sized socket.
Ask FixBot
-
-
-
Remove the wheel by lifting it from the truck.
-
Repeat this step for the other wheel.
-
-
-
Place the skate tool over the bolt on the truck.
-
Maintain a good grip on the tool and use the Phillips screwdriver to loosen the nuts.
-
Repeat this step for all four screws.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Team
Texas Tech, Team S3-G9, Cowan Spring 2021 Member of Texas Tech, Team S3-G9, Cowan Spring 2021
TTU-COWAN-S21S3G9
1 Member
12 Guides authored
