Introduction
You will need a Phillips screwdriver to remove the screws from the back of the phone, and a spudger to pry the plastic pieces from each other.
What you need
-
-
Pry up the plastic layer with a plastic opening tool.
-
NOTE: Be careful that you do not separate the two plastic parts completely they are fragile and may break if pulled too hard.
-
-
-
-
Check if the edges are perfectly aligned between the two plastic layers after you insert the keyboard.
-
-
-
Press the two plastic layers back together.
-
Reinsert the four screws and place the battery and cover back.
-
Ask FixBot
You now have a new keyboard.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Ohio State, Team 1-4, Meza Spring 2014 Member of Ohio State, Team 1-4, Meza Spring 2014
OSU-MEZA-S14S1G4
4 Members
6 Guides authored
