Introduction
Use this guide to replace the camera lens of your Panasonic Lumix DMC-ZS25. It will describe the procedure to disassemble your camera in order to replace the lens.
What you need
-
-
-
Open the four 3.40 mm screws from the right and left sides of your Panasonic Lumix Camera.
-
Remove the two 2.60 mm screws located next to the battery.
Ask FixBot
-
-
-
Use the iFixit opening tool to open the outer cover of your device.
-
The easiest place to open your device is from the HDMI port.
-
-
-
Use a spudger to detach the ribbon cable.
-
After releasing the screen cable, use the iFixit opening tool to lift the button board.
-
Once you hear a "click" sound, you have successfully opened the buttons board.
-
-
-
-
Open the two 4.20 mm screws to remove the inner cover located beneath the screen.
-
-
-
Use the spudger to unlock the screen cables from the circuit bored. Carefully, lift up the black clip up to release the cables.
-
Use your hands to remove the lens.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
USF Tampa, Team 9-5, Brown Winter 2015 Member of USF Tampa, Team 9-5, Brown Winter 2015
USFT-BROWN-W15S9G5
3 Members
60 Guides authored
