Palm Centro Screen Replacement
Last updated on Jan 28, 2014
Views: 3.3K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 10
- Past 30 Days:
- 37
- All Time:
- 3,301
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 3 4
3 people have marked this guide "completed." Will you be next?
4 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Confusing Text
Some of this guide's text is confusing, duplicated, or off-topic. Clarify it by editing!
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Introduction
Go to step 1 ↓This guide is for the removal and replacement of the Palm Centro's screen.
What you need
Tools
-
-
-
-
Remove the touchpad pen from the top left corner on the back to reveal the last of 6 screws to be removed.
-
-
-
Lift the rubber cap at the top right to reveal the sixth screw.
-
Remove the six screws using the T5 Torx screwdriver.
-
-
-
Use a plastic pry tool to separate the bottom of the case to remove the small plastic insert.
-
-
-
Continue with plastic pry tool all the way around the phone to remove the back housing.
-
-
-
-
-
Carefully peel back the tape holding the speaker (left) and keyboard (right) connection tabs in place.
-
-
-
-
Using the plastic prying tool, lift the tabs and carefully pull the contact connections out on both sides.
-
-
-
Separate the logic board from the case by lifting and pulling out the bottom.
-
-
-
-
-
Slowly peel off the protective lining that is on the screen and keyboard.
-
-
-
Lift and slowly remove the screen from the front panel
-
Place the new screen into the front panel
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
Cal Poly, Team 15-49, Garner Spring 2010 Member of Cal Poly, Team 15-49, Garner Spring 2010
CPSU-GARNER-S10S15G49
5 Members
72 Guides authored
