Opening the Case
Jamie Chamberlain and one other contributor
Last updated on Jul 12, 2022
Views: 2.6K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 30
- Past 30 Days:
- 121
- All Time:
- 2,585
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 13 14
13 people have marked this guide "completed." Will you be next?
14 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Needs More Images
A few more images would make this guide's procedures crystal clear.
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓This guide will show you how to remove the cover on a OptiPlex 7020
-
-
-
Disconnect the computer and all attached devices from their electrical outlets
-
Disconnect any telephone, network, or USB cables from the computer
Ask FixBot
-
-
-
Locate the cover latch at the side of the chassis. Pull the cover latch upward
-
Pull the cover upward to a 45 degree angle and remove it from the system
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
13 other people completed this guide.
