Onda VI10 Speaker Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

This guide will teach you how to remove the speakers for the Onda VI10.

What you need

1. Step 1 Speaker
  Use a number 0 screw driver to remove the four screws.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
2. Step 2
  Power Button on the side should be pointing outward.
  
  Note: This is so the ribbon cables inside are not damaged.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
4. Step 3
  Locate the black and red speaker wires going back to the mother board.
  
  Note: Speaker wires may run underneath the battery wires.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
5. Step 4
  Carefully remove the speaker cables from the retaining tabs using a thin metal spudger.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
6. Step 5
  Pry the speaker out of its molding using a thin metal spudger
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
7. Step 6
  Desolder the two speaker wires from the motherboard using a soldering iron.
  
  Caution: Soldering Iron is extremely hot.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 1 other contributor

Carlos Diaz

Member since: 03/08/17

101 Reputation

1 Guide authored

Team

IUPUI, Team S4-G3, Baechle Spring 2017 Member of IUPUI, Team S4-G3, Baechle Spring 2017

IUPUI-BAECHLE-S17S4G3

4 Members

36 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 17

Past 30 Days: 95

All Time: 460