Olympus VR-350 Back Plate Replacement
Last updated on Jun 19, 2015
Views: 1.5K
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 23
- Past 30 Days:
- 97
- All Time:
- 1,455
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
Introduction
Go to step 1 ↓This guide will teach you how to remove and replace the camera's back plate. This can help you replace the plate if it is broken.
What you need
Tools
-
-
-
Remove the two 4mm screws from each side of the camera with a Phillips PH000 screwdriver.
Ask FixBot
-
-
-
Remove the four 4mm screws from the bottom of the camera with a Phillips PH000 screwdriver.
-
-
-
Use the plastic opening tools and your fingers to pry the front plate from the camera.
-
-
-
-
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team 1-3, Leahy Winter 2015 Member of USF Tampa, Team 1-3, Leahy Winter 2015
USFT-LEAHY-W15S1G3
3 Members
60 Guides authored
