Numark TT1600 Belt Drive Replacement
Nikolai and 5 other contributors
Last updated on Jan 28, 2014
Views: 7.6K
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 23
- Past 30 Days:
- 129
- All Time:
- 7,581
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 2 3
2 people have favorited (and subscribed to) this guide. Will you be next?
3 people have favorited (and subscribed to) this guide — including you!
Introduction
Go to step 1 ↓Make sure device is unplugged.
-
-
-
Install new belt by securing it around the inner ring, located on the back of the platter.
-
-
-
Place a thumb in each hole.
-
Gently pull the belt with each thumb, keeping the belt taut around the inner ring.
-
-
-
-
Secure platter back on turntable while keeping belt taut.
-
Pull belt around motor spindle.
-
Gently let go of belt.
-
Ask FixBot
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Cal Poly, Team 17-14, Regan Fall 2011 Member of Cal Poly, Team 17-14, Regan Fall 2011
CPSU-REGAN-F11S17G14
4 Members
84 Guides authored
