Nortel Networks i2004 IP Buttons Replacement
Andrew Wang and 4 other contributors
Last updated on Jan 28, 2014
Views: 1.4K
View statistics:
- Past 24 Hours:
- 0
- Past 7 Days:
- 4
- Past 30 Days:
- 29
- All Time:
- 1,388
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Introduction
Go to step 1 ↓If some buttons are not working on your phone, use this guide to replace them.
What you need
Tools
-
-
-
Flip the phone over to view the back.
-
Remove the power and phone cords.
Ask FixBot
-
-
-
Disconnect the rubber piece by pulling it out of the slot, freeing the back cover completely.
-
-
-
Remove the six 8mm Phillips #2 screws.
-
Pull the speaker phone cover straight up.
-
-
-
-
-
Lift out the speaker and set it away from the tray that holds it.
-
Then remove the black plastic tray at the bottom by lifting it straight up.
-
-
-
Pull the gray plastic casing away from the circuit board as you remove the clear, curved, plastic piece straight up.
-
-
-
There are three clips on the circuit board to un-clip.
-
Unclip both back black clips with your fingertips.
-
Push the middle black clip towards the bottom of the picture with a flathead screwdriver.
-
-
-
-
Lift the edge of the circuit board over the phone case and slightly up, so the bottom of circuit board can be viewed.
-
-
-
Push down each brown clip on either side of the brown metal strip using your fingertip.
-
Detach the circuit board from the brown ribbon.
-
-
-
-
Press the broken button from the front of the phone.
-
Remove the broken button through the back.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 10-35, Amido Winter 2012 Member of Cal Poly, Team 10-35, Amido Winter 2012
CPSU-AMIDO-W12S10G35
4 Members
60 Guides authored
