What you need
-
-
Tool used on this step:Tweezers$4.99
-
Remove the sim card holder by inserting tweezers into the hole. Push down and the holder will spring back up.
-
Pull out the holder until it is completely separate.
Ask FixBot
-
-
-
Slide a plastic opening tool under the back cover.
-
Slide the tool around the outsides of the cover to fully dislodge the pins holding the cover to the phone.
-
-
-
Remove the 3 screws using the T7 Torx screwdriver.
-
Unclip the black tab connector.
-
-
-
-
Unclip the two orange tabs.
-
Remove the four silver screws using the T5 Torx screwdriver.
-
-
-
Remove the motherboard by sliding tweezers between it and the back of the screen. Lift up.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
University of North Texas, Team S4-G6, Raign Fall 2018 Member of University of North Texas, Team S4-G6, Raign Fall 2018
UNT-RAIGN-F18S4G6
4 Members
60 Guides authored
