Introduction
Be the envy of onlooking gamers with a shiny new rear bezel on your DSi XL.
What you need
-
-
Use a push pin to remove the four plastic screw covers on the front bezel.
Ask FixBot
-
-
-
-
Insert a spudger into the gap between the front and rear bezel
-
Rotate the spudger away from the DSi XL, prying the two bezels apart.
-
-
-
In the same manner as described above, continue prying along the top edge of the front and rear bezels.
-
-
-
Use the flat end of a spudger to pry the rear camera off the rear bezel.
-
Remove the rear bezel.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
