Introduction
If you need to replace the back vent cover, use this guide to assist you. Additionally, this is a required step for disassembly to replace other parts on the unit.
What you need
-
-
The back vent cover is directly above where the power cord protrudes.
Ask FixBot
-
-
-
-
Use a Phillips #2 screwdriver to unscrew and remove four 1 cm screws from the panel.
-
-
-
Once unscrewed, remove all four screws in order to remove the back vent cover.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
