Nikon N2000 (F301) Battery Compartment Replacement
Zachary Phillips and 4 other contributors
Last updated on Jan 28, 2014
Views: 21K
View statistics:
- Past 24 Hours:
- 11
- Past 7 Days:
- 52
- Past 30 Days:
- 226
- All Time:
- 21,311
Comments: 3
1 comment on steps, 2 guide comments.
Go to guide commentsCompleted: 5 6
5 people have marked this guide "completed." Will you be next?
6 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
Mismatched Prerequisites
This guide does not have a proper prerequisite guide. Help match it to its ideal partner by finding it or writing one!
Missing Prerequisites
This guide is missing information on how to start the process. Make a prerequisite guide!
Introduction
Go to step 1 ↓If there is a power problem, you may need to reattach wires to the battery compartment or replace it completely. If the problem is Corrosion, just see the guide on corrosion.
What you need
Parts
Tools
-
-
-
Unscrew the large metal screw on the left side using a quarter and remove the battery cover.(Picture not available)
Ask FixBot
-
-
-
Use a 00 Phillips head screwdriver to remove the small screw on the far left of the battery compartment.
-
-
-
Use a 00 Phillips head screwdriver to remove the four screws from inside the case.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Team
Cal Poly, Team 25-26, Garner Spring 2011 Member of Cal Poly, Team 25-26, Garner Spring 2011
CPSU-GARNER-S11S25G26
3 Members
72 Guides authored
