Nikon CoolPix S600 Lens Assembly Replacement
andreas anggasastra and 5 other contributors
Last updated on Jan 6, 2015
Views: 4.1K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 20
- Past 30 Days:
- 108
- All Time:
- 4,122
Comments: 1
1 guide comment.
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 3 4
3 people have favorited (and subscribed to) this guide. Will you be next?
4 people have favorited (and subscribed to) this guide — including you!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
What you need
Tools
-
-
-
With the lens facing forward, remove the one 4.2 mm screw on the bottom right hand corner of the camera.
Ask FixBot
-
-
-
Remove the two 3.2 mm screws from the right side of the camera (with lens is facing forward)
-
Remove the one 3.2 mm screw from the left side of the camera (with lens facing foward)
-
-
Tool used on this step:Tweezers$4.99
-
Use the tweezers to disconnect the ribbon from the circuit board.
-
-
-
Remove the one 2.6 mm screw from the left side of the camera (with the lens facing forward)
-
-
-
Use the Spudger to remove the copper colored light bulb clip.
-
Remove the front cover entierly from the camera body.
-
-
-
-
-
From the top view of the camera, remove the one 5.8 mm screw.
-
From the top view of the camera, remove the one 2.8 mm screw
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Cuesta, Team 1-6, Zipperian Fall 2011 Member of Cuesta, Team 1-6, Zipperian Fall 2011
CUESTA-ZIPPERIAN-F11S1G6
2 Members
60 Guides authored
