Introduction
This guide is to be used to install the SD card in the case that the SD card is damaged or no longer functions properly due to overuse. A Phillips screwdriver will be needed to complete this installation.
What you need
-
-
Using the thumb, firmly push the Battery/SD cover in the middle and in the direction of the arrow on the Battery/SD cover.
-
This will cause the Battery/SD cover to pop open.
Ask FixBot
-
-
-
-
Press down on the SD card. This will cause it to eject, thus enabling it to be removed.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Clemson, Team 12-5, Benson Spring 2013 Member of Clemson, Team 12-5, Benson Spring 2013
CLEM-BENSON-S13S12G5
4 Members
15 Guides authored
