Nikon CoolPix S5 Back Cover Replacement
Patty Richeson and 10 other contributors
Last updated on Jun 30, 2023
Views: 1.4K
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 19
- Past 30 Days:
- 89
- All Time:
- 1,418
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
Introduction
Go to step 1 ↓This guide is to be used to install the back cover in the event that it becomes damaged. A Phillips screwdriver will be needed to complete this installation.
What you need
Tools
-
-
-
-
Remove the four screws adjacent to the SD/battery opening using a Phillips #00 screwdriver.
-
-
-
Start on the wristlet side of the camera and use the #00 Phillips screwdriver to remove the two screws that hold the backplate in place.
-
Repeat the removal of the two screws on the other side of the camera.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Clemson, Team 12-5, Benson Spring 2013 Member of Clemson, Team 12-5, Benson Spring 2013
CLEM-BENSON-S13S12G5
4 Members
84 Guides authored
