NeuTab N9 Camera Replacement
Allan Lieu and 2 other contributors
Last updated on Jan 14, 2018
Views: 480
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 18
- Past 30 Days:
- 90
- All Time:
- 480
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This guide will tell you how to replace the camera in the Neutab N9. No prerequisite guides are required for this replacement.
What you need
Tools
-
-
-
Insert the plastic opening tool into the seam between the screen and the back of the tablet. Move the opening tool along the seam until the back of the tablet releases.
Ask FixBot
-
-
-
Locate your camera in the corner of your tablet, connected to the circuit board.
-
Insert your plastic opening tool into the clip that secures the camera ribbon to the circuit board. Gently pry up until the clip releases its hold on the ribbon.
-
-
-
-
The rear-facing camera module of the tablet is secured to the device with a strong adhesive. Insert your plastic opening tool underneath the rear-facing camera module and gently pry it up until it is released from the glue. You may now remove the entire camera assembly.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
University of North Texas, Team S7-G7, Thomas Fall 2017 Member of University of North Texas, Team S7-G7, Thomas Fall 2017
UNT-THOMAS-F17S7G7
4 Members
48 Guides authored
