Free Shipping on Domestic Orders $75+

Nespresso Vertuo Next Power Button Replacement

Philip_S and 4 other contributors

Last updated on Jun 24, 2025

1.5K

View statistics:

Past 24 Hours:: 4
Past 7 Days:: 25
Past 30 Days:: 151
All Time:: 1,532

4 comments on steps.

1 person has marked this guide "completed." Will you be next?

No one has favorited (and subscribed to) this guide. Will you be the first?

15 - 40 minutes

Difficult

Introduction

Go to step 1 ↓

Use this guide if you have a non-working or malfunctioning power button in your Nespresso Vertuo Next. The power button is used to power on and off the machine, as well as brew coffee and descale the machine. Without the power button you would never be able to use the machine, and if the button is malfunctioning, the machine would turn on and off at random moments, as well as brew coffee at random moments.

Before you remove and replace the power button, ensure that there is a direct source of electricity to the machine. If the power supply is faulty, the machine will not turn on. Also ensure that there is no damage in the wires connecting the button to the circuitry of the machine. If no damage can be located, then the power button is the most likely candidate for the problem and will need to be replaced. Before replacing, check to make sure the device is fully disconnected from any source.

What you need

Tools

1. Step 1 Power Button
  Side an opening tool in between where the top cover meets the white head piece and apply force to push the cover off.
  
  Remove the cover from the device.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
2. Step 2
  Use a T19 Torx screwdriver to remove the white top cover of the machine.
  
  While pulling away the top cover, ensure that you don't pull out any wires or other parts.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
4. Step 3
  Pop out the power button by pressing your thumb on the button and pressing down.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
6. Step 4
  Use tweezers to unplug the wires from the power button.
  
  Apply slight force and carefully pull the wire out as to not damage any pins.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Cancel: I did not complete this guide.

One other person completed this guide.